Receive A Free Gift

When You Order $99+

Extra 40% Off Everything SITE-WIDE!* Some Exceptions Apply - Use Coupon Code PINK40

Clone-A-Willy Vibrator Kit in Light

Clone-A-Willy Vibrator Kit

1/6
  • Clone-A-Willy Vibrator Kit
  • Clone-A-Willy Vibrator Kit
  • Clone-A-Willy Vibrator Kit
  • Clone-A-Willy Vibrator Kit
  • Clone-A-Willy Vibrator Kit
  • Clone-A-Willy Vibrator Kit

Click small image to enlarge

Clone-A-Willy Vibrator Kit in Light

Sale $49.99 CDN

Only 0 left! Ships within 24 hours
Free Shipping!

499 in PinkCherry Points


Great for Couples (Anonymous)

I highly recommend this product. It was a little messy but turned out with a lot of detail. I will definitely be purchasing this item again.


I'd do it, agian. (Elle Quence)

The company has revisions of the instructions. Help forums suggest that you lessen the stir time for the initial member casting. Otherwise the end product will be a bit more bubbly (porous) then one would like, it was when we tried. Stick to the bathroom, so you can hop in the shower to wash off.


Dirty Craft Fun for Two! (Anonymous)

My boyfriend bought me this kit for Christmas. We finally got some kid-free time over this weekend, so it made for a great little project! It was fun doing the "prep work" beforehand to keep him hard for the mold. It's a bit messy, but worth it! Also, the silicone cured in less than the recommended 24 hour wait time, so the next afternoon, we removed the replica from the mold, and we were both very impressed with the likeness! It was so much fun, I think we'll buy another kit, perhaps in hot pink! Every couple should try this, it's an awesome project for couples.


Product Description

Often imitated but never with as much crowd-pleasing success as the original, the fantastically unique Clone-A-Willy Kit allows playmates to create a vibrating silicone replica of his penis as back-up for business trips, lonely nights or to pinch hit for the real thing during marathon pleasure sessions.

Full instructions are included, but the basic process is simple, mix up the molding powder and water in a bowl, and pour into the tube that doubles as packaging until you're ready to use it. Since the penis needs to be fully erect - the harder, the better - use your favorite means to that end (a cock ring will help), and then have him insert himself into the natural algae-based molding powder mix and hold the tube steady for a minute or two until it has set. Once he's out, you can start creating your vibe right away, or maybe you'll want to make use of the real thing first; either way, when you're ready, completely pour the combined contents of both jars of silicone mix into the mold. Next, position the vibe in the center of the filled mold and let it all set.

What you'll be left with is an exact copy of your favorite cock with all details intact AND vibration that will make the whole thing buzz for your perfect pleasure. Make sure to follow the very detailed instructions for best results. The appearance of your Clone-A-Willy will vary, deeding on the size and shape of your man. Phthalate and latex free. Vibe requires 1 AA battery, which is sold separately.

Contains
  • Molding tube
  • Molding powder
  • Silicone mix
  • Vibrator unit
  • Thermometer
  • Stir stick

Product Code: CLONE-A-WILLY
UPC Code: 763290085316
ITEM: EMP-085316

(0)

Customer Reviews

Awesome (Anonymous)

Got this as a bit of a gag for my boyfriend but we had such a blast doing this together- so cool- and a fun way to introduce toys into your life cuz you can't help but have fun and laugh doing this. Take it slowly and read all the instructions before starting.

Good fun (Ron)

More fun than a barrel of Monkeys. Open a bottle of wine, sit down read the instructions, then let the fun begin. Fair warning, if you open the second bottle of wine you will probably have to order a second kit. Worth it though, the result is awesome. Follow the instructions exactly!

Great going away gift (Anonymous)

I bought this for my girlfriend before i moved away. We had a blast doing this together. it was great fun and would do it again in a second. She always tells me when shes using it. And thats pretty often.

So much Fun! (Anonymous)

It makes a realistic replica! The detail is amazing. It was so much fun getting him ready for the mold and figuring out how to keep it him that way. So much fun. I think every couple should try doing this.

Fun!! (Anonymous)

So much fun!! Loved the fun of doing it together and doing things for him to keep him hard (the vibrator that comes with this can be useful in this respect :) )

difficult (Adam)

I don't know if it was just me but I didn't have it turn out good at all and created a fair amount of a mess in the process. Followed the steps but it didn't turn out at all.

Messy fun (Anonymous)

We had so much fun doing this kit- I want to try others in the collection. You do have to read the instructions carefully- and I can see how it's possible to screw it up- but we had a blast- and honestly even if it doesn't come out just perfect it's still a great time

Great product (Anonymous)

This product was great! Made a great replica of, well ya know! Good product for a long distance relationship!

Better than store bought! (Bruiser)

Many people seem to have a difficult time with the mold gelling to quickly and them not being quick enough to shove their shaft in the tube while the mold is still a liquid. These people cannot be blamed, I mean come on! You only have two minutes to mix the powder with the water, pour the mixture in the tube, and shove your shaft in the tube. Plus you have to be hard when you put your shaft in the tube. Many people say that you need a partner to do this. I have done this by myself and I have figured out a way to make it easier. According to the instructions - You have to start a two minute timer, mix the powder and 98 degrees Fahrenheit water for 60 seconds (1 minute).
That only leaves you 1 minute to put the mixture in the tube and get your shaft in their while trying to remain hard!
My method: Every ten degrees cooler you go with the water it will give you an extra 45-60 seconds before it is gelled. Simply lower the water temperature to 80 degrees Fahrenheit. This will give you two minutes of EXTRA time! That way after you pour the mixture into the tube you still have plenty of time to get yourself hard and put your shaft in the tube. I watched porn to maintain my hardness. Since I was doing it in the living room (in front of the TV) I had to lie something down on the floor so that the mixture would not get all over the carpet. I had also read the instructions fully before starting. I had everything laid out and ready to go (prepped).
After the mold is done you are no longer rushed. You might see some comments that say that you should shave your pubes. I saw several comments regarding this but I chose to ignore them. Let me just say, SHAVE YOUR PUBES! My hairs got stuck in the mold. I managed to pull some of the hairs out of the mold but some got pulled out of my body (quite painful). While trying to pull out of the mold I had also ripped a chunk out of the mold because the hairs would not let go. Afterwards, I just took the chunk and put it back in. At the point when you shove your shaft into the tube, all the excess mixture will come pouring out of the tube all over your balls and around the base of your shaft. Some of the hairs had remained in the mold when I poured in the liquid flesh. I was quite surprised when the dildo was finished and I pulled it out of the mold. What had happened was that the hairs had mixed with the liquid flesh and when the flesh solidified the hairs ended up as part of the dildo. Just makes it more realistic!
I gave this to my wife for her birthday, LOL. According to her, it is better than a store bought dildo. She says that most dildos are straight and that makes them easier to insert. Whereas, the natural thing has some wave to it and that it is more pleasurable. Perfect, as this makes an exact copy of your own shaft!

Absolutely perfect! (CanadianGirl)

This product is absolutely amazing. As long as you carefully follow the instructions, you get a perfect replica of your mans package. Lots of fun to make and perfect for whatever you use your man for ;). Great for couples with opposite schedules, or long business trips. I would recommend for anyone.

A Great Way to Have Some Fun!! (Joan)

I bought this with a bit of a hidden agenda. I have several girlfriends who get a little crazy when we have a girls night out. There are a couple of us that "play around" with each other a bit more...nothing too far but enough to have some fun.
We seems to always get talking about sex and what we are up to with our partners/husbands. Although we joke about swapping, and a few of us might be a bit more open to it, none of us would actually take it that far.
That being said, I joked about somehow making a dildo of our husbands cock and what if we shared them! This way I could be doing one of there husbands and they mine without that "gone too far" worry. The girls loved it so we all bought one. Within a week they were all made. We put them all in a bag and one by one drew them out, then shared who's was who's
What a turn on!!! None of the guys seemed to notice for some reason, and each week we would do the exchange.
Pretty kinky but let me tell you what a turnon it will be to you ladies!!!
Real easy to do as long as you can keep him hard

Dirty Craft Fun for Two! (Anonymous)

My boyfriend bought me this kit for Christmas. We finally got some kid-free time over this weekend, so it made for a great little project! It was fun doing the "prep work" beforehand to keep him hard for the mold. It's a bit messy, but worth it! Also, the silicone cured in less than the recommended 24 hour wait time, so the next afternoon, we removed the replica from the mold, and we were both very impressed with the likeness! It was so much fun, I think we'll buy another kit, perhaps in hot pink! Every couple should try this, it's an awesome project for couples.

I'd do it, agian. (Elle Quence)

The company has revisions of the instructions. Help forums suggest that you lessen the stir time for the initial member casting. Otherwise the end product will be a bit more bubbly (porous) then one would like, it was when we tried. Stick to the bathroom, so you can hop in the shower to wash off.

Great for Couples (Anonymous)

I highly recommend this product. It was a little messy but turned out with a lot of detail. I will definitely be purchasing this item again.

lots of fun (Anonymous)

tried this with the wife and it turned out exactly like my penis, always wanted to try dp but not with another man and this worked out perfect, the vibe is a bonus!!

So much fun! (Mars)

Easy to follow instructions, fun and sexy 'craft time' resulted in highly detailed toy. Best toy I own!

Perfect for the average penis (Adriano)

I have a very average penis and it was a perfect gift for my long distance girlfriend. Thanks!!!

My Willy (XXX101)

I got this as a gift for my girlfriend as she wanted my "willy" at home with her. It turned out great but keep in mind that it is a rather messy job and you need time things well in order for best results. And guys, as a plus my girlfriend is now very much into anal after being able to practice on herself at home

Great! (Anonymous)

Great product, works wonders! Make sure you move fast during the making though

clone a willy (sharlie)

So fun to make with my man. ..tricky at times messy at times and make sure you follow the directions perfectly

Great!! (Jen)

Best purchase ever! Love it for when hubby goes out of town for work

Good long distance gift! (Sebastien)

Girlfriend and I are long distance and this gift was perfect to make the sexting a little bit more close to the real thing together!

Good, Fun, A Little Messy (Big J)

My girlfriend enjoys the mold. The process is a little messy but next attempt should be smoother. The instructions are easy to follow and makes for a fun and kinky couples experience.

Awesome Toy (Mr Magoo)

My girlfriend loves the clone a willy because she can take it home with her!! We do not live together or even in the same city, so when she is at home she uses the clone and loves every inch of me at home as well!!!

Worked well! (Hard on)

Read the instructions carefully and follow them. Get everything ready ahead of time, just like baking a cake. USE A COCK RING to stay hard and get the best form. You may have to cut the ring off to get out (I did). See how you fit in the tube before starting so you know how long to cut it and how to position the tube later to keep your manhood right down the middle of the tube. Don't be in a rush, especially during the first part (creating the mould). In the second part (filling the mould) mix the two liquids thoroughly, but stir slowly, to avoid air bubbles. A great toy!

Clone-a-Willy (Anonymous)

We need to order another bag of molding powder, it set to quick and could not mold.

Amazing (Nick)

Its realy realistic my girlfriend love that
But you need to do quickly with the molding;)

Very fun product. (Adam)

Very realistic feel, the wife loves it and said if I could vibrate it would feel the same.

fun product (Adam )

very life like, the wife says that if I could vibrate I'd be as enjoyable lot.

She loves it (John)

What else can I say, but she loves it!!


Write Your Own Review

You're reviewing: Clone-A-Willy Vibrator Kit in Light

* Required Fields

View Full Site View Mobile Site